Shindaiwa 89307 - Manual (Page 3)

This label indicates the minimum
distance between front handle and
rear grip.
Safety Labels
50 FEET (15m)
KEEP BYSTANDERS AWAY AT LEAST 50 FEET (15m)
BEWARE OF THROWN OR
RICHOCHETED OBJECTS
KEEP AWAY FROM
ROTATING BLADE
Shindaiwa
READ THE OPERATOR’S MANUAL
WEAR HEARING AND
ANSI Z87.1 APPROVED EYE PROTECTION
P/N 19422-00046
3
ALWAYS wear eye protection to shield
against thrown objects.
NEVER run the engine when transport-
ing the unit.
NEVER run the engine indoors! Make
sure there is always good ventilation.
Fumes from engine exhaust can cause
serious injury or death.
ALWAYS use the proper cutting tool for
the job.
ALWAYS clear your work area of trash or
hidden debris that could be thrown back
at you or toward a bystander.
ALWAYS stop the engine immediately
if it suddenly begins to vibrate or shake.
Inspect for broken, missing or improperly
installed parts or attachments.
ALWAYS keep the unit as clean as prac-
tical. Keep it free of loose vegetation,
mud, etc.
ALWAYS KROGWKHXQLW¿UPO\ZLWKERWK
hands when cutting or trimming, and
maintain control at all times.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug wire
before performing any maintenance
work.
Work Safely
This machine operates at ver y high
speeds and has the potential to do seri-
ous damage if misused, abused or mis-
handled. To reduce the risk of injur y,
you must maintain control at all times,
and obser ve all safety precautions dur-
ing operation. Never permit a person
without training or instruction to operate
this machine!
Safety
WARNING!
Never make unauthorized
attachment installations. Do not
use attachments not approved by
Shindaiwa for use on this unit.
WARNING!
Never operate
power equipment of any
kind if you are tired or if you are under
WKHLQÀXHQFHRIDOFRKROGUXJVPHGLFD-
tion or any other substance that could
affect your ability or judgement.
WARNING!
Use Good Judgement
Stay Alert
You must be physically and mentally fit to
operate this unit safely.
IMPORTANT!
Safety and Operation Information Labels: Make sure all
information labels are undamaged and readable. Imme-
diately replace damaged or missing information labels.
New labels are available. Contact your local authorized
Shindaiwa dealer.