Advanced usb playback – Sharp XL-UH242 User Manual
Page 26
03/12/17
XL-UH242 20-28.fm
26
XL-UH242
USB Memory Playback
Advanced USB playback
Repeat play
Repeat play can play all tracks sequence continuously.
To cancel repeat play:
Press the / button again until " " disappear.
Random play
The tracks can be played in random order automatically.
To cancel random play:
Press the / button.
"R" will disappear.
Notes:
If you press the
button during random play, you can move to
the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous
track. The beginning of the track being played will be located.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat, be sure to press the (USB ) button.
Otherwise, it will play continuously.
Note:
Notes:
This unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency fs is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3" , "MPEG-2.5 Audio Layer-3" and MP1,
MP2 format are not supported.
Program playback for USB memory is not available.
Playback order for MP3 files may differ sometimes depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported by this unit.
This unit can display Folder Name or File Name up to 32
characters.
This unit only supports MP3 ID3-Tag version 1.x.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Time display cannot be changed by the DISPLAY button.
Title name and artist name can be displayed by pressing the
DISPLAY button during file playback or pause mode.
WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
Copyright protected WMA files cannot be played back.
To repeat all tracks:
Press the / button twice.
To random play all tracks:
Press the RANDOM button on the remote control.
(
) When folder mode is on, the selected playmode can be used for
the files in the selected folder only.