Sharp XL-UH242 - Manual (Page 23)

03/12/17 XL-UH242 20-28.fm
23
XL-UH242
CD or MP3/WMA disc Playback
Procedure to playback MP3/WMA disc
To playback CD-R/RW.
Note:
If "NO SUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
1 Press the CD button, and load a MP3/WMA disc.
After disc is loaded, disc info will be displayed.
In case folder is selected, proceed to step 2.
In case file is selected, proceed to step 4.
2 Press the FOLDER button, and press the TUNING ( or )
button to select desired playback folder. (Folder mode on)
To start playback with folder mode on, go to step 5.
To change the playback folder, press the TUNING ( or ) to se-
lect another folder.
3 Select desired file to be played back by pressing the
or button. Proceed to step 5.
Total number of files
TOTAL indicator
MP3 indicator
Disc Name
WMA indicator
Disc 1 Blinking
Total files in Folder 3
FOLDER indicator
FOLDER number
4 Select desired file to be played back by pressing the
or button. (Folder mode off)
5 Press the / (CD / ) button.
Playback will start and file name will be displayed.
Title, Artist & Album name is displayed if it is recorded on the disc.
Display content can be changed by pressing the DISPLAY button.
In case of playback with the folder mode on, press the TUNING (
or ) button, and the folder can be selected even though it is in
playback/pause mode.
It will continue playback/pause mode in the 1st track of the selected
folder.
(
1) MP3 ID3-Tag only support version 1.x.
( 2) Only appears when clock is already set.
File Name Display Title Display
Function Display Artist Display
TITLE-1 Indicator
TITLE-2 Indicator
Clock Display Album Display TITLE-3 Indicator
( 1)
( 1) ( 2)