Sony KP-51DS2U - Manual (Page 8)

8
First Time Operation
The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to 1) choose the language
of the menu screen, 2) search and stores all available channels (TV Broadcast) and 3) change the order in which the channels
(TV Broadcast) appear on the screen.
However, if you need to change the language menu, change the country, change or repeat the tuning (e.g. when you move
house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in
the
(PRESET) .
Switching on the Projection TV and Automatically Tuning
1
Connect the Projection TV plug to the mains socket (220-240V AC,
50 Hz). Press the
on / off button on your projection TV set to
switch on. The first time you press this button the Language menu
displays automatically on the screen.
2
Push the joystick on the remote control to $ or 4 to select the
language, then press OK to confirm your selection. From now on all
the menus will appear in the selected language.
3
The Auto Tuning menu appears on the screen in the selected
language, then press the OK button on the remote control to select
YES .
4
A new menu appears automatically on the screen asking you to
check that the aerial is connected. Confirm that the aerial is connected
and then press the OK button to start the automatic tuning.
The TV starts to automatically search and store all available
channels (TV Broadcast) for you and the message “Searching”
flashes on the screen until all available channels will be stored.
If any analogue channel is tuned, it will be stored in
programme numbers 91 to 99 but only in the case that these
positions are free. However, if you wish to tune in any
analogue channel and store it in the programme number of
your choice, please refer to the section "Manually Tuning the
TV" of this instruction manual.
This procedure could take some minutes. Please, be patient and
do not press any button. Otherwise the automatic tuning will
not be completed.
continued...
First Time Operation
LANGUAGE
English
Deutsch
Français
Italiano
Nederlands
Polski
Česki
Magyar
Eλλnvιkά
Select Language:
Confirm: OK
LANGUAGE
English
Deutsch
Français
Italiano
Nederlands
Polski
Česki
Magyar
Eλλnvιkά
Select Language:
Confirm: OK
LANGUAGE
English
Deutsch
Français
Italiano
Nederlands
Polski
Česki
Magyar
Eλλnvιkά
Select Language:
Confirm: OK
Do you want to start
automatic tuning?
Yes
No
Confirm: OK
Please confirm that
antenna is connected
Confirm: OK
PROG
- -
Searching
AUTO PROGRAMME
SYS
DIG
CHAN
C 26
SERV
- - LABEL
- - - - -
S
RM 892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV