Sony KP-51DS2U - Manual (Page 4)

4
Safety Information
Do not open the cabinet and the rear cover of
the TV. Refer to qualified service personnel
only. To prevent fire or shock hazard, do not expose
the TV to rain or moisture. For your own safety, do not touch any part
of the TV, power lead or aerial lead during
lightning storms.
Do not cover the ventilation openings of the
TV For ventilation, leave a space of at least
10cm all around the set.
Never place the TV in hot, humid or
excessively dusty places. Do not install the
TV where it may be exposed to mechanical
vibrations. To prevent fire, keep inflammable objects or
naked lights (eg candles) away from the TV.
Clean the TV with a soft, lightly dampened
cloth. Do not use benzine, thinner or any
other chemicals to clean the TV. Do not
scratch the TV screen. As a safety precaution,
unplug the TV before cleaning it.
Pull out the power lead by the plug. Do not
pull on the power lead itself. Take care not to place heavy objects on the
power lead as this could result in damage.
We recommend you wind any excess lead
around the holders provided on the rear of the
TV.
Place the TV on a secure stable stand. Do not
allow children to climb on to it. Do not place
the TV on its side or face up.
Do not cover the ventilation openings of the
TV with items such as curtains or newspapers
etc.
Never push objects of any kind into the set as
this could result in a fire or electric shock.
Never spill liquid of any kind on the set. If
any liquid or solid object does fall into the
cabinet, do not operate the TV. Have it
checked immediately by qualified personnel.
For environmental and safety reasons, it is
recommended that the TV set is not left in
standby mode when not in use. Disconnect
from the mains.
This set is to operate on a 220-240V AC supply
only. Take care not to connect too many
appliances to the same power socket as this
could result in fire or electric shock.
Unplug the power lead before moving the TV.
Avoid uneven surfaces, quick steps or
excessive force. If the set has been dropped or
damaged, have it checked immediately by
qualified service personnel.
Additional Safety Information
Safety Information
Safety Information
•After transporting the projection TV directly from a cold to a
warm location, or if the room temperature has changed
suddenly, pictures may be blurred or show poor colour over
portions of the picture. This is because moisture has
condensed on the mirrors or lenses inside the projection TV.
Let the moisture evaporate before using the projection TV.
•To obtain a clear picture, do not expose the screen to direct
illumination or direct sunlight. If possible, use spot
lighting directed down from the ceiling.
• Displaying a still picture for long periods of time, for instance,
when operating a video game or personal computer and viewing
aprogramme in 16:9 mode, may damage the picture tube. To
avoid this, keep the picture contrast level low.
• Clean the projection TV screen and cabinet with a soft dampened
cloth. Do not use any abrasive cleaners. As a safety
precaution, unplug the set before cleaning it.
• Avoid touching the screen, and take care not to scratch the
surface with hard objects.