beautypg.com

Safety labels, Be aware of the working environment, 50 feet – Shindaiwa 81719 User Manual

Page 4: Shindaiwa

background image

4

Safety Labels

Figure 3

IMPORTANT

Safety and Operation Information
Labels: Make sure all information
labels are undamaged and readable.
Immediately replace damaged or miss-
ing information labels. New labels are
available from your local authorized
Shindaiwa dealer.

LE2510

This label indicates the minimum

distance between front handle and

rear grip.

Be Aware of the Working Environment

Avoid long-term operation

in very hot or very cold

weather.

Make sure bystanders or observers

outside the 50-foot “danger zone”

wear eye protection.

Be extremely careful of

slippery terrain, especially

during rainy weather.

Always

make sure the appro-

priate cutting attachment shield

is correctly installed.

If contact is made with a hard

object, stop the engine and inspect

the cutting attachment for damage.

When operating in rocky terrain or

near electric wires or fences, use ex-

treme caution to avoid contacting such

items with the cutting attachment.

Be constantly alert for objects and

debris that could be thrown either

from the rotating cutting attachment

or bounced from a hard surface.

Reduce the risk of by-

standers being struck by

flying debris. Make sure

no one is within 50 feet

(15 meters)—that’s about

16 paces—of an operating

attachment.

Figure 2

50 FEET

50 FEET

(15m)

KEEP BYSTANDERS AWAY

AT LEAST 50 FEET (15m)

BEWARE OF THROWN OR

RICHOCHETED OBJECTS

KEEP AWAY FROM

ROTATING BLADE

Shindaiwa

READ THE

OPERATOR’S MANUAL

WEAR HEARING AND

ANSI Z87.1 APPROVED

EYE PROTECTION

P/N 19422-00046

This manual is related to the following products: