Sharp OZ-590 User Manual

Page 10

Setting the Alarm time

1. Tap h, then tap the Home

Clock menu on the menubar.

2. In the list of menu, tap to

select (or use k or m to
select, then press x) a
desired Alarm: Alarm 1, Alarm
2, or Alarm 3.

3. Tap the “ icon to edit the

selected Alarm setup.

4. Enter the Alarm time to go off. Each field value can be increased or

decreased by using the k or m keys.

5. When done, tap the “Note” field. Enter a reminder here, if desired.

6. Tap æ , or press x to activate the Alarm settings.

While the Alarm is activated, the “

” icon will appear on the

screen.

Alarm

The Organizer has 2 types of alarm:

1. Daily Alarm.......... Sounds every day at the specified time (for

approx. 1 minute), when "

" is displayed.

Up to 3 alarms can be set separately (Alarm1,
Alarm2, and Alarm3).

2. Schedule Alarm... Sounds at the specified times set in the Schedule

entries (see page 12).

Press any key or tap the screen to stop the Alarm sounding.

When the set time arrives, the Alarm will sound, and the reminder
message will be displayed.

Note:
• Each Alarm can be set independently from other Alarms.
• Once set, the Alarm can be activated or deactivated by tapping o

or ).

Timer

The Timer mode literally functions as a timer. When the specified
time passes, the Organizer will remind you with the alarm sound.

Setting the Timer

1. Tap ! once or twice, then find and tap the Q icon to enter the

Timer mode.

2. In the Timer mode, set the Timer activation time. Enter "000130", for

example, to set the Timer to go off at a minute and a half later.
When done entering, tap x.
The Timer is now activated, and the clock starts ticking.

3. The Timer alarm should sound after one minute and thirty seconds

later.
Tap the screen, or press any key to stop the alarm sounding.

Note:
• Only one Timer can be set at a time.
• The largest Timer interval to be set is 23:59:59.
• The alarm will automatically stop sounding after 1 minute.

OZ590_1211.pm65p1_9

02.12.13, 1:50 PM