Smeg SA9065XS - Manual (Page 10)

Instructions for the installer
12
5. FINAL OPERATIONS
After replacing the nozzles, reposition the flame-spreader crowns, the
burner caps and the grids.
5.1 Adjustment of the hob burner minimum level for natural gas
Light the burner and take it to the minimum .
Remove the gas tap knob and turn the
adjustment screw inside of the tap shaft
(depending on the model) until there is a regular
minimum flame. Replace the knob and check
burner flame stability: (rapidly turning the knob
from maximum to minimum position, the flame
should not go out). Repeat the operation on all
the gas taps.
5.2 Arrangement of the burners on the hob
Burners
1 Auxiliary
2 Semi rapid
3 Rapid
4 Wok
7 Fish burner