Smeg SA9065XS - Manual (Page 12)

Instructions for the user
6. DESCRIPTION OF CONTROLS
6.1 Front control panel
All the cooker controls and commands are on the front panel.
If the cooker is equipped with an electronic programmer, before using the
oven make sure that the symbol ; appears on the display. See
paragraph “5.2.1 Clock adjustment”.
DESCRIPTION OF SYMBOLS
FRONT RIGHT BURNER CENTRAL BURNER
BACK RIGHT BURNER BACK CENTRAL BURNER
BACK LEFT BURNER FRONT CENTRAL
BURNER
FRONT LEFT BURNER ELECTRIC OVEN
THERMOSTAT
ELECTRIC OVEN
FUNCTION KNOB
HOB BURNER COMMAND KNOB
The flame is lit by pressing the knob and turning it
anticlockwise to minimum flame . To adjust the
flame turn the knob between maximum ( ) and
minimum ( ). The burner goes out when the knob
is returned to the position .
ELECTRIC OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by
turning the knob clockwise to the required
temperature, between 50° and 260°C.
If the appliance has an electric oven, the warning
light will come on when the oven is heating up.
When it goes out it means that the required
temperature has been reached. Regular flashing
means that oven temperature is being constantly
maintained at the programmed level.
14