Stamina Products 1725 - Manual (Page 8)

ASSEMBLY INSTRUCTIONS
8
STEP 3
Plug the SENSOR WIRE(35) firmly into the SENSOR CONNECTION WIRE(34). Plug the LOWER CONTROL
WIRE(99) firmly into the CONTROL WIRE(98).
CAUTION: Be careful not to damage the SENSOR WIRES(34, 35) and CONTROL WIRES(98, 99) when
assembling the UPRIGHT(6).
STEP 4
Insert the UPRIGHT(6) into the MAIN FRAME(1) and secure with BUTTON HEAD BOLTS(M8x1.25x15mm)
(65), ARC WASHERS(M8)(89), and LOCK WASHERS(M8)(91). Do not tighten the bolts until STEP 9.