SoniqCast AireoTM - Manual (Page 21)

Aireo User Guide
Version Mismatch
Connect via USB
To resolve Mismatch
This message indicates that SoniqSync version on your SoniqSync host does not
match the SoniqSync version on your Aireo. If you see this message, disconnect
the wireless connection and connect the player through the USB port to the
SoniqSync Host to upgrade the player.
2. Click Upgrade to continue. SoniqSync installs firmware on the player.
Uploading Firmware will appear in the Status field of the SoniqSync dialog and
the Progress field will be active. When finished, a message appears stating that
SoniqSync has finished uploading firmware.
3. Look at the display screen on your Aireo. If you are connected through the USB
port , you will see "Remove USB cable" displayed on the screen. Remove the
USB cable.
4. Select Continue and press the Play/Select button.
5. Plug the AC adapter into Aireo if you see the following message:
Battery level too low
6. Press any key on the player to continue. You will see the following message:
Firmware Upgrade in progress
Warning: Do not interrupt
(may take 3 to 4 minutes)
When the player completes the upgrade, you will see the following message:
Firmware Upgrade Complete
Aireo will power down
Press any key to continue
7. Press any key on Aireo to power down the player.
8. Connect the USB cable and power on the player to access the latest updates.
Connecting Your Player to a SoniqSync Host
Introduction
From the SoniqSync™ view on your Aireo player you can wirelessly connect to the
SoniqSync Host installed on a PC. You can use a wireless connection through a Wireless
Access Point (WAP) to perform many of the features SoniqSync provides: like wirelessly
and automatically transferring music to your Aireo player.
15