beautypg.com

Adjustments and settings using the menu, Using the menu – Sony VPL-CS2 User Manual

Page 26

background image

GB

26

Using the MENU

VPL-CS2/CX1

4-079-834-11 (1)

D:\Data\Oka\407983411VPLCS2CX1WW\02GB-
VPLCS2,CX1WW\05AJT.fm

masterpage:Left

B

Adjustments and Settings Using the Menu

Using the MENU

The projector is equipped with an on-screen
menu for making various adjustments and
settings. You can change the menu language
displayed in the on-screen menu.

To change the menu language, see
“Selecting the Menu Language” on page 20.

1

Press the MENU key.

The menu appears.
The menu presently selected is shown as
a yellow button.

2

Use the

M or m key to select a menu,

then press the

, or ENTER key.

The selected menu appears.

3

Select an item.
Use the

M or m key to select the item,

then press the

, or ENTER key.

4

Make the setting or adjustment on an
item.

• When changing the adjustment level:

To increase the number, press the

M

or

,

key.

To decrease the number, press the

m

or

< key.

Press the ENTER key to restore the
original screen.

• When changing the setting:

Press the

M or m key to change the

setting.
Press the ENTER or

< key to restore

the original screen.

To clear the menu

Press the MENU key.
The menu disappears automatically if a key
is not pressed for one minute.

To reset items that have been
adjusted

Press the RESET key.
“Complete!” appears on the screen and the
settings appearing on the screen are reset to
their factory preset values.
Items that can be reset are:
• “CONTRAST,” “BRIGHT,” “COLOR,”

“HUE,” and “SHARP” in the PICTURE
CTRL menu

• “DOT PHASE,” “SIZE,” and “SHIFT” in

the INPUT SETTING menu

• “DIGITAL KEYSTONE” in the SET

SETTING menu

About the memory of the settings

The settings are automatically stored in the
projector memory.

If no signal is input

If there is no input signal, “NO INPUT–
Cannot adjust this item.” appears on the
screen.

8 0

5 0

PICTURE CTRL

CONTRAST:

BRIGHT:

GAMMA MODE: GRAPHICS

COLOR TEMP:

HIGH

INPUT-A

SET SETTING

STATUS:

ON

INPUT-A:

RGB

KEYSTONE MEMORY: OFF

DIGITAL KEYSTONE:

OFF

LANGUAGE:

ENGLISH

POWER SAVING:

OFF

SIRCS RECEIVER:

FRONT&REAR

LAMP TIMER:

00010h

INPUT-A

Menus

Setting items

This manual is related to the following products: