Sanyo VPC-S1415 - Manual (Page 24)

EN-23
Photo Frame Function
Use this function to add suitable frame to your image and make it personalized.
1. Press the
SET button, and set the camera mode to
[ ], and press the SET button.
2. Select [Photo Frame] with the e / f / c / d
buttons, and press the SET button.
3. Select your favorite frame withe / f / c / d
buttons, and press the SET button.
4. Press the shutter button down fully to capture your
image.
Recording Shots using Face Detection Technology
Face Detection Technology can identify and focus on the human faces in the image.
1. Press the
SET button, and set the camera mode to [ ].
2. Press the button, and select [ ] icon with the e / f buttons. Press the SET
button.
„
With Face Detection turned on, the camera
identifies main face (white frame) and subsidiary
faces (gray frames).
„ If the camera cannot detect and track any faces,
there will be no frame shown on the screen.
3. Press the shutter button halfway down to lock the focus.
„ When the main face is in focus, the white frame
simultaneously turns green. Otherwise, it turns red.
4. Press the shutter button down fully to capture your
image.
„ Subjects that are not suitable with this function:
a. A person is wearing glasses, sunglasses, or face is covered with hat or hair.
b. A person turns sideways.
Self-portrait Function
Use this function to take pictures of yourself or include yourself in pictures.
1. Press the
SET button, and set the camera mode to [ ].
2. Press the
e
button, and select [ ] icon with the e / f buttons. Press the SET
button.
3. Press the shutter button.
4. If the camera detect and track any faces, after twice blinking of the self-timer LED,
one image will be captured.
„
Press the shutter button to exit.
„ If it does not detect any face within 30 seconds, the camera will automatically
capture an image and return to preview display.
„ Select [ ] to reactivate this function.
Main Face(Green Frame)
Focus Lock