Sony DRBT20NX - Manual (Page 14)

14
To adjust the volume
Push the jog switch up or down to
adjust the volume while listening to
music.
Tips
• When the volume level is low, raise the
volume of the connected device. The
sound will be clearer.
• Volume level for calling and listening
to music can be set independently.
To stop use
1
Terminate the
BLUETOOTH connection
by operating the
BLUETOOTH device.
2 Press and hold the
POWER button for
about 3 seconds.
The indicator (blue) and
indicator (red) light up together,
and the unit turns off.
Tip
When you finish playing music, the
BLUETOOTH connection may terminate
automatically, depending on the
BLUETOOTH device.
Controlling the audio
device – AVRCP
If the BLUETOOTH audio device
connected with this unit supports
AVRCP (Audio Video Remote
Control Profile), you can control by
using the unit buttons.
Refer to the operating instructions
supplied with the connecting device
on how to operate it.
Note
Operation of the BLUETOOTH
connecting device by this unit will vary
depending on its specification.
Status: In stop or pause mode
1 Starts playback* 1
2 Stop
3 Skip to next/previous
4 Fast-forward/Fast-rewind* 3
Status: In play mode
5 Pause* 1
6 Stop
7 Skip to next/previous
8 Fast-forward/Fast-rewind* 2
once and hold
Nx
./>
2
4
1
3
Press
once and hold
Nx
./>
6
8
5
7
Press