Sharp CP-G20000S - Manual (Page 38)

38
06/2/14
Advanced Features
CD-G20000_E3.fm TINSEA128AWZZ
CP-G20000S
CD-G20000 Timer and sleep operation (Remote Control only) (continued)
4 Within 10 seconds, press the or button to
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
5 Press the or button to select "PLAY" or
"REC", and press the MEMORY button.
The illustrations show the daily timer setting.
6 Press the or button to adjust the hour and
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
7 Press the or button to adjust the minutes and
then press the MEMORY button.
8 Set the time to finish as in steps 6 and 7 above.
White Red
9 Switch input with the or button, and then
press the MEMORY button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY
button.
If a station has not been programmed, "NO PRESET" will
be displayed and timer setting will be canceled.
10 Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11 Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.