Sharp CP-G20000S - Manual (Page 37)

37
06/2/14
Advanced Features
CD-G20000_E3.fm TINSEA128AWZZ
CP-G20000S
CD-G20000
Timer and sleep operation (Remote Control only)
Timer playback:
The unit turns on and plays the desired source (CD, MP3 disc, tuner,
tape) at the preset time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset
time.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
Note:
When the setting times for the daily timer and once timer overlap,
the once timer takes priority. Allow an interval of at least 1 minute
between operations.
Timer playback or timer recording
Before setting timer:
Continued to the next page
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play and once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a
radio station.
Daily timer: Daily timer play and daily timer recording works at
the same preset time everyday.
For example, set the timer as a wake up call every morning.
1 Set the daily timer (pages 37 - 39).
2 Set the once timer (pages 37 - 39).
Start
Daily timer Once timer
1 minute or more
Stop Start Stop
1 Check that the clock is set to the correct time (refer to page 19).
If it is not set, you cannot use the timer function.
2 For timer playback: Load a cassette or discs to be played.
For timer recording: Load a cassette for recording in the TAPE
2 cassette compartment.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the or button to select
"ONCE" or "DAILY", and press the MEMORY button.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.