Sharp FO-4470 - Manual (Page 85)

Timer Operations
83
5. Spe
c
ial
Functions
Note: If you need to delete a number, press or until the destination
appears in the display and then press .
9
Press .
10
Press and/or to adjust the resolution and contrast if
desired, and then press .
11
Load the document and then press .
•
The document will be scanned into memory.
STOP
START/
ENTER
RESOLUTION CONTRAST
START/
ENTER
START/
ENTER
Canceling a timer operation
If you need to cancel a timer operation before it is performed, follow the steps
below.
♦
You will need to know the number assigned to the operation in order to
cancel it. If you don’t remember the number (it appears in the display when
you set the operation), print out the Timer List. (See page 116.)
1
Press (flip up the Rapid Key
overlay if it is down) and then .
2
Enter the 2-digit number assigned to the operation.
3
Press .
4
Press repeatedly until you return to the date and time display.
TIMER
X/>
2
START/
ENTER
STOP
2:TIMER COMM. CLEAR
ENTER #(01-59)
Display: