Sharp FO-4470 - Manual (Page 28)

Setting the Date and Time
26
Setting the Date and Time
The date and time appear in the display, in reports, and at the top of each
page you transmit. Set the date and time by pressing the keys on the
operation panel as shown below.
1
Press and .
2
Press and .
3
Enter a two-digit number for the month (“01” for January, “02” for
February, “12” for December, etc.).
Example: March
•
To correct a mistake, press to move the cursor back to the mistake and
then enter the correct number.
4
Enter a two-digit number for the day (“01” to “31”).
Example: The 5th
5
Enter the year (four digits).
Example: 2006
6
Enter a two-digit number for the hour (“01” to “12”) and a two-digit
number for the minute (“00” to “59”).
Example: 9:25
MENU
3
0 4
0 3
0 5
2 0 0 5 6
0 9 2 5
(The currently set date will appear
to the right of “DATE”)
Display:
3:ENTRY MODE
ENTER #(01-08, , )
04:DATE&TIME SET
DATE 06-08-2006