Smeg AP2640TC1 - Manual (Page 7)

Instructions for the user
24
7. USE OF THE COOKING HOB
7.1 Hobs with knobs
7.1.1 Single cooking zones
Each knob shows the cooking zone it is for.
For example, the symbol
identifies the knob that
controls the rear right-hand cooking zone.
To heat, turn the knob to the desired position (1 to 6).
Adjustment is continuous so that the appliance also
operates at any intermediate value.
7.1.2 Dual cooking zones
Each knob shows the cooking zone it is for.
For example, the symbol
identifies the knob that controls the rear right-hand
cooking zone.
To heat the inner cooking zone, turn the knob to the desired position (1 to 6).
To heat both the inner and outer cooking zones, turn the knob to
and then
release. The knob will thus return to 9. To adjust heating intensity, rotate the
knob anticlockwise to the desired position. To return to heating of the inner
cooking zone only, set the knob back to 0 and then turn to the desired position
(1 to 6).
7.1.3 Description of symbols
REAR LEFT REAR RIGHT
FRONT LEFT FRONT RIGHT
7.1.4 Residual heat
The 4 warning lights located between the cooking zones come on when the temperature
of one or more of the zones exceeds 60°C.
The lights go off upon temperature dropping to below approximately 60°C.
7.1.5 Switching off
To turn off, return the knob to 0.