Shark S3501 User Manual

Page 9

TOLL FREE:

1-800-798-7398

www.sharkcompany.com

English

IMPORTANT: First things first, always
make sure the mop is

UNPLUGGED

from the wall when not in use. Never
fill the mop, attach the mop head,
change or remove the micro-fiber
pocket when the mop is plugged into
the wall. If you have hard water you
might want to use distilled water to
prolong the life of the Shark

Steam

Mop. Make sure you only add water
to the tank. Chemicals or cleaning
solution may damage the appliance
and could be unsafe for you and
your family.

ASSEMBLE

Insert the mop handle into the pump

actuator (the tube that leads to the
tank). Push the mop handle and
pump actuator together in until you
hear it click into place.

Select a mop head and cleaning

pad. Choose from the Rectangle or
Triangle mop head. Fit one side of the
pocket onto the head first, then using
the lavender loop, pull the pocket
over the head. Attach the quick
fasteners on the top of the pocket to
secure in place.