Sharp PG-D2510X - Manual (Page 18)

16
Easy Start
This section shows the basic operation (projector connecting with the computer). For details,
see the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
STANDBY button 8
KEYSTONE button 5
3 ON button
6 INPUT buttons
5 Adjustment
buttons
(P/R/O/Q)
6
INPUT buttons 6
STANDBY/ON
button
3
8
Focus ring 4
HEIGHT
ADJUST lever 4
Zoom ring 4
6 O/Q buttons
1. Place the projector facing a wall or a screen BP. 18
When connecting equipment other than a computer, see pages
22 and 23 .
2. Connect the projector to the computer and plug the power
cord into the AC socket of the projector
BPP. 21, 24
On the projector On the remote control
3. Open the lens shutter fully and then turn the projector on
BP. 25