Sony RDR-VX410 - Manual (Page 99)

99
Se
ttings an
d Adjustme
nts
2
Select an option and press ENTER.
“Program”: Press M/m repeatedly to select the
programme position (1 to 80) for the channel
and press ENTER.
“Channel”: Press
M/m to select the channel
number (002 to 255) and press ENTER.
“AFT”: Fine tunes the channel to obtain a
clearer picture. If the picture is not clear,
select “Off” and press ENTER. See “To adjust
pictures manually” (page 99).
“Tuner Audio”: Sets the channels for the
NICAM broadcast. Normally, select
“NICAM.” If the sound from the NICAM
broadcast is not clear, select “Standard” and
press ENTER.
“Station Name”: Changes a station name. See
“To rename the station” (page 99).
◆To adjust pictures manually
Select “Off” for “AFT” in the display for manual
setting. When the fine tuning bar appears, press
ENTER.
◆To rename the station
You can set up to four characters for the station
name. Select “Station Name” in the display for
manual setting.
Press
M/m to select a character.
Each time you press M, the character changes as
follows: A t B... t Z t 0 t 1... t 9 t - t
A
Press
, to set the next character. To correct a
character, press < and reset it. After setting all
characters, press ENTER.
Channel List
You can change or disable the programme
positions after setting the channels. The disabled
programme positions will be skipped when you
press PROG +/–.
1
Select “Channel List” and press ENTER.
The list of all the preset channels appears.
2
Press M/m to select the row containing the
programme position you want to change or
disable.
To change, press ENTER and go to step 3.
To disable, press CLEAR and go to step 5.
If there are more than six programme
positions, press
M/m repeatedly to display the
next page.
3
Press M/m until the selected channel row
moves to the desired programme position.
4
Press ENTER.
The selected channel is inserted at the new
programme position.
5
To change or disable the programme position
of another station, repeat from step 2.
Note
Be sure to correctly select the programme position you
want to disable. If you disable the wrong programme
position by mistake, you need to reset that channel
manually.
Program
Channel
AFT
Tuner Audio
Station Name
01
002
On
NICAM
AAC
Manual Set
Fine Tuning
Prog. CH Name
011 DDE 3
012 FGH 4
061 PQR 5
128 QQR 6
2 005 AAB
1 002 AAC
Channel List 10:10
CH
011 DDE
005 AAB
3
061 PQR 5
128 QQR 6
2
102 AAC 1
002 AAC 4
Channel List 10:10
Prog. Name