Sony RDR-VX410 - Manual (Page 112)

112
The c indicator flashes after timer recording is
set.
, Insert a recordable disc (page 30).
, Insert a disc with enough space for the recording.
, The disc has 99 or more titles, which prevents
further recording.
, The disc is protected (page 69).
The SYNCHRO REC indicator flashes after
Synchro-Recording is set.
, Insert a recordable disc (page 30).
, Insert a disc with enough space for the recording.
, The disc has 99 or more titles, which prevents
further recording.
, The disc is protected (page 69).
Contents previously recorded were erased.
, Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
VCR Playback
The playback picture does not appear on the TV
screen.
, Make sure the TV is set to the channel for the VCR.
If you are using a monitor, set it to video input.
The picture is not clear.
, Adjust the tracking by the TRACKING +/–
buttons.
, Set “Colour System” in the “Features” setup
correctly to match the colour system that the tape
was recorded in (page 105).
, The video heads are dirty (see page 114). Clean
the video heads using a Sony video head cleaning
cassette. If a Sony cleaning cassette is not
available in your area, have the heads cleaned at
your nearest Sony dealer (a standard service fee
will be charged). Do not use a commercially
available liquid type cleaning cassette, as it may
damage the video heads.
, The video heads may have to be replaced.
Consult your local Sony dealer for more
information.
, The tape is defective.
The picture rolls vertically during picture
search.
, Adjust the vertical hold control on the TV or
monitor.
The picture has no sound.
, The tape is defective.
, Check the audio cord connection.
A tape cannot be inserted.
, Check that a tape is not already in the tape
compartment.
VCR Recording
The programme position cannot be changed
from the one you are recording.
, Set the TV’s input source to “TV.”
No TV programme appears on the TV screen.
, Make sure the TV is set to the channel for the VCR.
If a monitor is used, set it to video input.
, Select the correct source with the PROG +/– or
INPUT SELECT buttons. Select a programme
position number when recording TV programmes;
select “LINE1,” “LINE2,” or “LINE3” when
recording from other equipment.
TV reception is poor.
, Adjust the TV aerial.
The tape starts playing as soon as it is
inserted.
, The safety tab has been removed. To record on
this tape, cover the tab hole.
The tape is ejected when z REC is pressed.
, Check that the safety tab has not been removed.
Nothing happens when z REC is pressed.
, Make sure the tape is not at its end.
VCR Timer recording
The timer does not operate.
, Check that the clock is set.
, Make sure a tape has been inserted.
, Check that the safety tab has not been removed.
, Make sure the tape is not at its end.
, Make sure a programme has been set for timer
recording.
, Make sure the timer settings are set for a future
time.
, Check that the satellite or digital tuner is turned
on.
, “- -:- -” appears in the front panel display if the