Sony STR-DG300 - Manual (Page 20)

20 GB
C:\Documents and
Settings\pc13\Desktop\JC060685_2662257111DG300_GB\2662257111\GB03CON_STR-
DG300-CEL.fm masterpage: Left
STR-DG300
2-662-257-11 (1)
Insert two R6 (size-AA) batteries in the
RM-AAU007 remote commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix alkaline batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
Tip
Under normal conditions, the batteries should last
for about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new ones.
6: Selecting the speaker
system
You can select the front speakers you want to
drive.
Be sure to use the buttons on the receiver for
this operation.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front
speaker system you want to drive.
To turn off the speaker output, press
SPEAKERS (OFF/A/B/A+B) repeatedly until
the “SP A” and “SP B” indicators on the
display do not light up.
Inserting batteries into the
remote
To select Light up
The speakers connected to the
SPEAKERS FRONT A terminals SP A
The speakers connected to the
SPEAKERS FRONT B terminals SP B
The speakers connected to both the
SPEAKERS FRONT A and B
terminals (parallel connection) SP A and
SP B
?/1
VIDEO 3 IN/ PORTABLE AUDIO IN
SPEAKERS (OFF/A/B/A+B)
PHONES
TREBLE BASS A.F.D. MOVIE MUSIC DIRECT
TUNING MODE DISPLAY INPUT MODE
INPUT SELECTOR TUNING – +
WOOFER ON/OFF MUTING
MASTER VOLUME
SPEAKERS
(OFF/A/B/A+B)
GB01COV_STR-DG300-CEL.book Page 20 Monday, May 22, 2006 7:39 AM