Samsung HL-R5067W - Manual (Page 114)

Using the D-Net
English - 114
Selecting a D-Net device
Prior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List.
1 Connect the relevant D-Net (IEEE1394) Compatible device in the list.
(See “How to connect compatible IEEE1394 Devices” on page 110)
2 Press the D-Net button on the remote control.
3 Select a connected D-Net device by pressing
the … or † button.
4 To select a device, press the ENTER button.
Then display the D-Net device control panel
and operate the selected device.
• The device list is in the order of DTV, STB, AVHDD, DVHS, Camcorder and UNCONTROLLABLE.
If there are multiple devices of the same type, the devices will be listed in ascending order of
the manufacturer name with Samsung first as the exception. If there are multiple devices of the
same type and they are manufactured by the same company, they will be listed in the order
of their serial number.
• The TV and all other devices connected
on the D-Net (IEEE1394) chain appear in
the D-Net device list.
• If “UNCONTROLLABLE” is listed in the
device list, the device is not supported by
the TV, and cannot be controlled with the
TV remote control or the D-Net control
panel on the screen.
• It is possible to connect a D-Net device to
another device and to the TV while the TV
is ON. The D-Net device list automatically
adds the newly-connected device to the list.
See “How to connect compatible IEEE1394
Devices”, page 110 on connecting
D-Net (IEEE1394) Compatible devices.
• At this time, the screen changes to the
picture from the selected device.
Copy-free
BP68-00469B-00(106~123) 9/13/05 3:11 PM Page 114