Sharp XE-A212 - Manual (Page 37)

35
When you program tax rate(s) and taxable status for each department (by default, VAT1/tax1 is set to taxable.),
tax will be automatically added to sales of items assigned to the department according to the programmed tax
status for the department and the corresponding tax rate(s).
For details of the tax systems, refer to “Computation of VAT (Value Added Tax)/tax” section on page 20. To
change the tax system, please refer “Other programming” of “Various Function Selection Programming 1”
section (Job code 69) on page 55.
Tax rate programming
The percent rate specified here is used for tax calculation on taxable subtotals.
For entering tax number, sign and tax rate and lowest taxable amount, the register displays guidance
messages, ENTER TAX NO., ENTER TAX RATE, and ENTER LOWER TAX respectively.
• The lowest taxable amount is valid only when you select add on tax system. If you select VAT
(Value added system), it is ignored.
• If you make an incorrect entry before pressing the third @ key in programming a tax rate, cancel
it with the l key.
• You do not need to enter the trailing zeros of the tax rate (after the decimal point), but you do
need to enter the decimal for fractions.
• If you select VAT system, the sign which you program is ignored.
To delete a tax rate, use the following sequence:
s @ A v @
Tax number (1 to 4)
9
s 9 @
2 @
4 @
12 s
A
Print Key operation example
s @ @
@ s A
When the lowest taxable amount is zero
To program other kind of tax
To program “0.0000”
Tax number (1 to 4)
Sign and tax rate
Lowest taxable amount
(0.01 to 999.99)
*
*Sign and tax rate: X YYY.YYYY
Tax rate=0.0000 to 100.0000
Sign –/+ = 1/0
9
A212_3 FOR THE MANAGER 03.7.5 8:02 AM Page 35