Sony DVD Rom/DVD Video - Manual (Page 29)

29
4.7 Label Film Data via
Electronic Storage Media
Sony DADC has its own Graphics Studio with the
following standard DTP (Desktop Publishing) equip-
ment:
HARDWARE
• Apple MAC G3
• Laser imager AGFA AccuSet 1000 with Software
Taipan RIP
(resolutions up to 2400 dpi)
• Laser imager AGFA Avantra 25 with Software Taipan
RIP (resolutions up to 3600 dpi)
• 3M Desktop Colour Proofing System
• Drum scanner ”Chromagraph S3300”
(resolution up to 14000 dpi)
SOFTWARE
recommended software accepted software
• Quark X-Press
• Aldus Pagemaker
• Aldus Freehand l Corel Draw (DOS)
• Adobe Illustrator
• Adobe Photoshop
Apple Macintosh Data
If your label films are produced on an Apple Macintosh
system you may transmit your designs on electronic
storage media for film burn-out.
DOS Data (Corel Draw)
If you have edited your designs under DOS, please
send us a placeable EPS file in which the text is
converted into curves and the image identification set is
switched on.
If you have used Corel Draw, please send us the
CDR file.
Other hardware and software
If you operate another software or hardware format
please contact Sony DADC’s Graphics Studio
(Tel. +43/(0)6246/880-448).
The following storage media
can be accepted:
• ZIP disk, JAZ disk and CD-R
• 3.5” floppy disk in Mac or DOS format
• 44/88/200 MB cartridge /5.25”) in Mac format
• 270 MB cartridge (3.5”) in Mac format
• MO disk 230 MB (3.5”) in Mac format
DTP-labelfilm template DISC
All labelfilm templates can be downloaded as
QuarkXpress file from the website:
www.sonydadc.com.
Upon request we will provide a 3.5” disk with all DVD
logos and the copies of all label film specifications and
printwork specifications used by us as Tiff or EPS
and/or QuarkXPress files, respectively. Please contact
our Customer Service department for assistance (Tel.:
+43/(0)6246/880-555).
4.8 Label Film Data via
Electronic Data Transfer
You also have the possibility to send us your data (label
film and printwork) via ISDN or Internet for exposure.
If you want to transmit data in such a way we ask
you to inform Customer Service before the transfer
commences.
ISDN DATA TRANSFER
Please note the following:
Our ISDN numbers are:
+43/(0)6246/73692 +43/(0)6246/75258
+43/(0)6246/74965
Hardware requirements:
All ISDN adapters, preferably the current ISDN boards:
• Leonardo • Planet • 4-Sight • Easy Transfer
Software requirements:
• 4-Sight Manager Version 4.3.1 or
• 4-Sight Broadcast
• Leonardo Pro
Please do not forget:
• Laser printout: Attach a print-out of a laser printer
to your documents.
• Fonts: Indicate manufacturer and all display set-
tings, if necessary enclose screen and printer fonts.
• TIFF and EPS files: All graphic files (logos,
company logos etc.) have to be supplied in all
cases.
• Changes: Beware of the major resolution of the
laser imager with fine lines, outlines and half tones.
In general these become thinner.
• Marking: Your floppy or cartridge should be marked
to provide clear identification.
• Liability: We do not assume liability for incomplete
or defective files. Only submit copies you have
checked and stored carefully.
4. Lableprinting