Scotts Automobile Parts - Manual (Page 2)

Installation Manual for Standard front steer IFS
Please note a few things before beginning:
Check the parts list thoroughly to be sure all items are there. If any items appear to be missing immediately call our tech
department. Remember, you must call within 30 days of receipt or you may be responsible for missing parts. Do not begin
installation until all parts are received. This will make it much easier to complete the installation
These instructions serve merely as a guideline. Scotts Hotrods can only assume this installation will be done at a qualified
installation shop or by a qualified installer. These instructions will guide you step by step through the basics; however Scotts
Hotrods cannot accept any liability for differences in this instruction manual, and your particular vehicle. Scotts Hotrods
recommends that all items to be welded be done so by a certified welder. We also recommend TIG welding all items.
Review our warranty online at www.scottshotrods.com
Tools recommended for installation:
Complete Standard socket set
Adjustable wrench
Safety glasses
Ear protection
Welding gloves
Soap stone or other marking utensil
Complete Standard Allen Wrench set
Level
Tape measure
Wire brush
Welder a fire extinguisher is also a good item to keep handy!!