Samsung SV-DVD545 - Manual (Page 10)

ENG-19 ENG-18
Your DVD-VCR displays most information both on the
DVD-VCR and the television.
You can choose to display or hide this information on
the television screen (except for the SEARCH,
Programming MENU and Timer functions, which
cannot be hidden).
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , ❷ buttons, until the
Screen Messages option is selected.
3 To... Press OK or ❿ , until...
Display on-screen information On is displayed.
Hide on-screen information Off is displayed.
4 On completion, press RETURN twice to exit the menu.
Screen Messages
Language : English
User Set
Auto Power Off : Off
Install
Screen Messages : On
On
Off
Selecting the Cassette Type
Repeat Play
If you wish to use the tape counter to display the time
remaining on a cassette, you must indicate the type of
cassette inserted.
1 After pressing the MENU press the corresponding
, ❷ buttons to select the VCR option.
2 Press the OK or ❿ buttons to select this option.
Result: The VCR Setup menu is displayed.
3 Press the corresponding , ❷ buttons, until the
Tape Select option is selected.
4 Press the OK or ❿ buttons as many times as
required, until the correct cassette length is
displayed.
E180 E240
E 300 E260
5 Press RETURN twice to exit the menu.
Repeat Play : Off
VCR Setup
Tape Select : E180
E180
E240
E260
E300
VCR Setup
Tape Select : E180
Repeat Play : Off Off
On
You can set repeat play to repeat the tape continuously
from beginning to end.
To... Press OK or ❿ , until...
Repeat play On is displayed.
Do not wish to repeat play Off is displayed.
The Auto Power Off feature automatically turns off
your DVD-VCR if no signal is received and you do not
press any button for the selected time.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , ❷ buttons, until the
Auto Power Off option is selected.
3 Press the OK or ❿ buttons, until you select the time
of Auto Power Off interval.
➝ Off ➝ 1Hour ➝ 2Hour ➝ 3Hour
4 On completion, press return twice to exit the menu.
Auto Power off
To prevent delays or over-runs the VCR has a function
called VideoPlus Extend allowing you to extend the
recording time by up to 60 minutes.
➢
Only use if PDC is not available or set to OFF.
1 After pressing the MENU, press the OK or ❿ .
2 Press the corresponding , ❷ buttons to select
the User Set option.
3 Press the OK or ❿ buttons to select this option.
Result: The User Set menu is displayed.
4 Press the corresponding , ❷ buttons, until the
VideoPlus Extend option is selected.
5 Press the OK or ❿ buttons to set the VideoPlus
Extend time by increments of 10 minutes.
6 To turn off, press OK or ❿ buttons repeatedly until
Off shows.
VideoPlus+ Extend
★
(SV-DVD540/SV-DVD545Only)
Colour System : Auto
NICAM : On
IPC : On
VideoPlus Extend : Off
User Set
Off
10
20
30
40
50
60
Language : English
User Set
Screen Messages : On
Install
Auto Power Off : Off
Off
1Hour
2Hour
3Hour
Protecting a Recorded
Cassette
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
1 If you wish to protect a cassette, break off the tab
using a small screwdriver.
2 To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower
quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode
LP is displayed.
Selecting the Recording Speed
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or 4 hours and 20 mins.
E-300 300 mins. or 5 hours
00374C SV-DVD440/XEU 1/30/04 5:07 PM Page 18