Appendix a – Star Tech Development BR4100DC User Manual

Page 46

Text mode
Original mode

Appendix A

Find and record your computer’s IP configuration settings

Note:

The following instructions are valid for Windows 95/98/Me/2000/XP only. If you

are using a different OS, consult your OS manufacturer for details. If after completing
this procedure you are still unsure of where to find some of the required information,
contact your ISP

for details.

1. Click on Start then Run.

2. Type “cmd” (or “command”) in the field and click OK.

3. At the command prompt, type “ipconfig /all” and press Enter. You should see a

screen with information similar to the following:

You should record the following information prior to connecting the router:

Host Name

(if any):

MAC/Physical Address

IP Address

Subnet Mask

Default Gateway