Star Tech Development BR4100DC - Manual (Page 18)

16
PPTP
If your ISP uses the Point-to-Point Tunneling Protocol (PPTP) to connect to the Internet,
you will be required to fill in the information below.
When you are satisfied with your IP address settings, click the OK button.
Congratulations!
You have completed the basic router configuration required for a PPTP
connection. You will be taken to the router’s Status page. You can click Logout to begin
accessing the Internet.
Parameter Description
IP Address Enter your IP address.
Subnet Mask Enter the subnet mask.
Default Gateway Enter the IP address of the ISP Gateway.
User ID Enter your User ID (also known as a connection ID).
Password Enter your password.
PPTP Gateway If your LAN has a PPTP gateway, enter the gateway
IP address here.
Idle Time Out As an option, you can specify the idle time
threshold (in minutes) for your WAN port. If the
time period expires with no Internet activity, the
router will automatically disconnect you from your
ISP. Setting this value to “0” means that the router
will never time out.