Savin 8700W - Manual (Page 29)

PAPER TYPE/ROLL WIDTH ENTRY FUNCTION
This function allows you to store the paper type and roll width for a selected
paper feeder. When you change the paper feeder to the specified one, the paper
type and roll width are set to the stored values.
1
Press the Paper Select key until
your desired paper feeder indica-
tor blinks.
The paper feeder indicator blinks.
The roll paper width is displayed
in the paper cut length indicator.
✏
You can press the Clear
Modes key to cancel the
indication.
2
Press the Paper Select key to
select the paper feeder.
3
Press the Paper Size key to
select the roll paper width.
✏
When you select "Manual
Feed" for the paper feeder,
you cannot specify the paper
size.
4
To use the New-ABCDE-size
paper, select "New size" using the
+ and - keys.
✏
When the paper feeder
indicator blinks for "New
size", the 24, 18, 12, and 9
indicators are lit.
22 COPYING