SMSC LAN9512 User Manual
Datasheet, Product features
Table of contents
Document Outline
- Chapter 1 Introduction
- Chapter 2 Pin Description and Configuration
- Figure 2.1 LAN9512 64-QFN Pin Assignments (TOP VIEW)
- Table 2.1 EEPROM Pins
- Table 2.2 JTAG Pins
- Table 2.3 Miscellaneous Pins
- Table 2.4 USB Pins
- Table 2.5 Ethernet PHY Pins
- Table 2.6 I/O Power Pins, Core Power Pins, and Ground Pad
- Table 2.7 No-Connect Pins
- Table 2.8 64-QFN Package Pin Assignments
- 2.1 Port Power Control
- 2.2 Buffer Types
- Chapter 3 EEPROM Controller (EPC)
- 3.1 EEPROM Format
- Table 3.1 EEPROM Format
- Table 3.2 Configuration Flags Description
- 3.1.1 Hub Configuration
- Table 3.3 Hub Configuration
- Table 3.4 Config Data Byte 1 Register (CFG1) Format
- Table 3.5 Config Data Byte 2 Register (CFG2) Format
- Table 3.6 Config Data Byte 3 Register (CFG3) Format
- Table 3.7 Boost_Up Register (BOOSTUP) Format
- Table 3.8 Boost_3:2 Register (BOOST32) Format
- Table 3.9 Status/Command Register (STCD) Format
- 3.2 EEPROM Defaults
- 3.3 EEPROM Auto-Load
- 3.4 An Example of EEPROM Format Interpretation
- 3.1 EEPROM Format
- Chapter 4 Operational Characteristics
- Chapter 5 Package Outline