Samsung 6300 Series - Manual (Page 38)

38
English
Advanced Features
Anynet+
What is Anynet+?
t
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to a Samsung Home Theater
1. Connect the HDMI IN ( 1(DVI), 2, 3 or 4 ) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device
using an HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎
NOTE
x Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theater.
x When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from
the Home Theater’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the
DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theater, not the TV.
x You can connect only one Home Theater.
x You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
x Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
x Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
TV Rear Panel
Home Theater
Anynet+
Device 1
Anynet+ Device
2, 3, 4
HDMI cable
(Not Supplied)
HDMI cable (Not Supplied)
HDMI cable (Not Supplied)
Optical Cable (Not Supplied)
[UC6300-USA]BN68-02956A-01Eng.indb 38 2010-06-22 오전 8:56:49