Network setup (auto), Network setup (manual) – Samsung 6300 Series User Manual

Page 25

English

Advanced

Featur

Network Setup (Auto)

Use the Automatic Network Setup when connecting your
TV to a network that supports DHCP. To set up your TV’s
cable network connection automatically, follow these steps:

How to set up automatically
1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the

button on your

remote, use the

▲ or ▼ button to select Setup, and

then press the

ENTER

E button.

3. Use the

▲ or ▼ button to select Network in the Setup

menu, and then press the

ENTER

E button. The

Network screen appears.

4. On the Network screen, select Network Type.
5. Set Network Type to Wired.
6. Select Network Setup. The Network Setup screen

appears.

7. Set Internet Protocol Setup to Auto.
8. Auto acquires and enters the needed Internet values

automatically.

9. Wait two minutes, and then press the

RETURN

button

on your remote.

10. If the Network Function has not acquired the network

connection values, go to the directions for Manual.

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to
a network that requires a Static IP address.

Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The

Network connection values are displayed.

How to set up manually
To set up your TV’s cable network connection manually,
follow these steps:
1. Follow Steps 1 through 6 in the “How to set up

automatically” procedure.

2. Set Internet Protocol Setup to Manual.
3. Press the

▼ button on your remote to go to the first

entry field.

4. Enter the IP Address, Subnet Mask, Gateway, and

DNS Server values. Use the number buttons on your
remote to enter numbers and the arrow buttons to move
from one entry field to another.

5. When done, press the

RETURN

button on your remote.

6. Select Network Test to check the Internet connectivity.

Network Setup

IP Address

Subnet Mask

Gateway

DNS

: Auto

DNS Server

U Move E Enter R Return

Internet Protocol Setup

: Auto

►

Network

U Move E Enter R Return

Network Type

: Wired

►

Network Setup
Network Test

SWL(Samsung Wireless Link)

: Off

SWL connect

[UC6300-USA]BN68-02956A-01Eng.indb 25

2010-06-22 오전 8:56:37