Woodstock SHOP FOX M1054 - Manual (Page 15)

-5-
M1048 10" x 18" Metal Cutting Bandsaw
IN
TR
O
DU
CT
IO
N
Control Panel
A. Coolant Pump Switch: Turns the coolant
pump ON.
B. EMERGENCY STOP/OFF Button: Interrupts
power to the system and turns the motor
OFF. Twist the button until it pops out to
re-energize the system. Also works as a stan-
dard OFF button.
Note: The bandsaw has an automatic shut-
off (limit switch) that turns the motor and
coolant pump OFF at the bottom of the
cut.
C. START Button: Turns the motor ON and
begins the sawing action.
D. Power Light: When lit, indicates that system
is energized and machine is ready to oper-
ate.
E. Feed Rate Dial: Fine tunes the feed rate by
controlling the hydraulic valve. Range is from
0 being slowest to 9 being fastest.
F. Feed Control Knob: Turning the knob to
the left lowers the bow at the feed rate you
have set. Turning the knob to the right locks
the bow in position.
Figure 2. M1048 control panel.
A
B C D
E
F