Sanyo DVW-7100a - Manual (Page 12)

Hint Hint
• To go back one step, press the s button (during
the steps [3] to [9].)
– 12 – EN
VCR Functions
On-Screen Operations
1 1 To call up the main menu
4 4 To exit the menu
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
2 2 To select an item
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
3 3 To decide
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
STOP
PLAY
1 2 3
4 5 6
7 8 9
0 +10
POWER SPEED AUDIO
DISPLAY
SLOW
PAUSE
ENTER
MENU
TOP MENU SETUP
MODE V.SURR SEARCH MODE
A-B REPEAT ANGLE SUBTITLE
T-SET
DVD
REC OTR
VCR TV
SKIP CH.
CLEAR C.RESET
VCR
RETURN
1 1
4 4
3 3
2 2
OR
4 4
Recording Features
•Insert a tape with its record tab into the DVD+VCR.
8 8 ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 3 SUN
START TIME 0 7 : 3 0 PM
END
TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED – –
2 2
PROGRAM NUMBER 1
DATE
– – / – –
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
3 3
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
4 4 Select the desired month.
Select the desired day.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 3 SUN
START TIME – – : – – – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
1 1
- M E N U -
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
Select an empty program
number.
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”.
5 5 Select the desired start time
(hour).
Select the minute.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 3 SUN
START TIME 0 7 : 3 0 – –
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
6 6 ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 3 SUN
START TIME 0 7 : 3 0 PM
END
TIME – – : – – – –
CHANNEL – –
REC SPEED – –
AM
B PM
Select “AM” or “PM”.
7 7 Repeat the procedure in steps 5
and 6 to set the end time.
Select the desired channel.
Timer Recording
• If you have connected the DVD+VCR to a
cable box or satellite box as the
Connection A on page 6, select the VCR
to channel 3 or 4 (the RF output channel
of the VCR). Then, select the desired
channel at the cable box or satellite box.
Leave the cable box or satellite box on for
timer recording.
• You can program one
year in advance.
9 9
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 0 3 SUN
START TIME 0 7 : 3 0 PM
END
TIME 0 8 : 3 0 PM
CHANNEL 1 6
REC SPEED SP
B SP
SLP
Select the desired recording speed.
10 10
• TIMER REC light on the front panel appears.
The DVD+VCR will change to the DVD mode.
1) Press the SUBTITLE/T-SET button
then, the VCR button on the remote
control.
2) Select main menu by pressing the
MENU button.
3) Select "TIMER PROGRAMMING"
by pressing the K or L button.
Then, press the B button.
4) Select the program number which
you want to check by pressing the K
or L button. The details of the pro-
gram you selected will appear on
the TV screen.
• Go to the digit you want to change
by pressing the B or s button.
Then, enter correct numbers by
pressing the K or L button.
• You may cancel the entire program
by pressing the s button while the
program number flashes.
5) Press the CLEAR/C.RESET button
to exit.
6) Press the SUBTITLE/T-SET button
to return to timer stand-by mode.
Press the STOP/EJECT button on
the DVD+VCR.
To cancel a Timer Recording in
progress
To Check, Correct, or Cancel a
Timer Program
VCR VCR VCR
VCR VCR VCR
VCR
Press the VCR button first.
VCR
Press the VCR button first.
• To set another program after step [9], press the
B button. Then, continue with step [2].
MENU
MENU
MENU
CLEAR
C.RESET
CLEAR
C.RESET
SUBTITLE
T-SET
or
or
or
or
or
or
or
or
or
or
TIMER PROGRAMMING
PROG 12345678
DATE
START TIME
END
TIME
CHANNEL
REC SPEED Program number which is
not set up flashes.
H9680UD_EN/SP.qx3 04.8.10 4:26 PM Page 12