SIIG 04-0322C - Manual (Page 11)

11
8. Click Yes, then click Finish to complete.
For Existing Installation
1.
Install the board and boot up Windows.
2. At the Add New Hardware Wizard, click Next.
3. Select Search for the best driver for your device and
click Next.
4. Insert the driver CD, check Specify a location,
uncheck the other boxes, type D:\9x-Me, then click
Next. (Change D: to match your CD-ROM drive
letter)
5. Click Next, then Finish.
6. Remove the driver CD and restart Windows to
complete the driver installation.
Windows ME
For New Installation
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2. Once Windows has been installed, right click My
Computer, then click Properties. Select Device
Manager tab.
3. Double click PCI Mass Storage Controller listed
under Other Devices.
4. Select Driver tab, then click Update Driver button.
5. Insert the driver CD, select Specify the location of
the driver (Advanced), then click Next.
6. Check Specify a location, uncheck the other box,
type D:\9X-Me, click Next. (Change D: to match
your CD-ROM drive letter)
7. Click Next, then click Finish.
8. Remove the driver CD, restart Windows to complete.