Data services – Siemens CF75 User Manual
Page 90
89
Setup
© Siemens AG 2004, E:\Auftrag
\Siemens\MobilePhones
\CF75 Adon
is\en\LA
\ADONIS_Connectivit
y.
fm
Template:
X75, Version 2.
2; VAR Language: en; VAR issue date:
050524
right page (89)
of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 15:18)
Data services
Basic setting and activation of the
connection profiles for data trans-
mission such as
MMS, WAP
.
The phone default setting varies from
service provider to service provider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually. In this case, you
will receive the necessary data
from the service provider or via
the "Setting Configurator" at
Select profile
I
Select the profile.
C
Confirm selection.
Set profile
I
Select the profile.
§Options§
Open menu.
§Edit§
Open the selection.
I
Select
CSD settings
, and/or
GPRS settings
.
§Edit§
Select service and enter
data (see below).
§Save§
Save settings.
CSD settings
(Circuit Switched Data)
GPRS settings
(General Packet Radio Service)
You can only start to use GPRS once
you have activated GPRS on your
Dial-up
number:
Enter ISP number.
Call type:
Select ISDN or ana-
logue.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS 1/DNS 2:
(optional).
APN:
Enter service provider
address.
Login:
Enter login name.
Password:
Enter password (shown
as a series of asterisks).
DNS 1 (opt.):
DNS 2 (opt.):
(optional).