beautypg.com

Questions & answers – Siemens CF75 User Manual

Page 125

background image

Questions & Answers

124

© Siemens AG 2004, E:\Auftr

ag\Siemens\MobilePhones

\CF75

Adonis\en\LA\ADONIS_FAQ.fm

Template:

X75, Version 2.

2; VAR Language: en; VAR issue date:

050524

left page (124)

of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 14:49)

Questions & Answers

If you have any questions about using your phone, visit us at www.siemens.com/

mobilephonescustomercare anytime. For additional help, we have listed below some

frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,

you can use a configuration service. This service is used to have the necessary settings for

your mobile phone sent to you by SMS. We recommend that you contact your network

provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at www.siemens.com/

mobilephonescustomercare. Siemens will then send you the configuration messages.

Please follow the instructions contained in those messages.

Problem

Possible causes

Possible solution

Phone cannot be

switched on.

On/Off key not pressed long

enough.

Press On/Off key for at least two seconds.

Flat battery.

Charge battery. Check charging indicator in

the display.

Battery contacts dirty.

Clean contacts.

See also below under

“Charging error”

Too little standby

time.

Frequent use of organiser

and games.

Restrict use if necessary.

Fast search activated.

Deactivate speed search(p. 95).

Display illumination on.

Switch off display illumination (p. 79).

Unintentional keystrokes

(illumination!).

Activate key lock (p. 92).

Charging error

(charge icon not

displayed).

Battery totally discharged.

1) Plug in charger cable, battery is on charge.

2) Charge icon appears after approx. 2 hours.

3) Charge battery.

Temperature out of range:

+5 °C to +45 °C.

Make sure the ambient temperature is right, wait for

a while, then recharge.

Contact problem.

Check power supply and connection to the phone.

Check battery contacts and telephone connection

socket, clean them if necessary, then insert battery

again.

No mains voltage.

Use different mains power socket, check mains

voltage.

Wrong charger.

Only use original Siemens accessories.

Battery faulty.

Replace battery.