Getting started, Inserting the sim card/ battery, Inserting the sim card/battery – Siemens CF75 User Manual
Page 10
9
Getting started
© Siemens AG 2004, E:\Auftrag
\Siemens\MobilePhones
\CF75 Ad
onis\en\LA\ADONIS_Startup.fm
Template:
X75, Version 2.
2; VAR Language: en; VAR issue date:
050524
right page (9)
of CF75 Adonis FUG en, A31008-H6010-A1-1-7619 (14.06.2005, 14:53)
Getting started
Inserting the SIM card/
battery
The service provider supplies you with
a SIM card on which all the important
data for your line is stored. If the SIM
card has been delivered in credit-card
size, snap the smaller segment out
and remove any rough edges.
• Press the grooved area
1
, then
push cover towards the front in
the direction indicated by the
arrow
2
.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then press the
SIM card slightly to push it in
3
(ensure that the chamfered corner
is in the correct position).
• Insert the battery sideways into
the phone
4
, then press it down-
wards
5
until it engages.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
• Place the battery cover, then push
it towards the front
6
, until it
clicks into place.
Additional information
Please switch off your phone before re-
moving the battery!
Only 3 V SIM cards are supported. Please
contact your service provider if you have an
older card.
SIM card problems ..........................p. 125
1
2
3
5
4
6