Drivedrive – Sony VPCF2 User Manual
Page 3
VPCF2 Series Hard Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N
989202611
Rev. B
3/4
NOTE! Proper mounting of the
Hard Drive Bracket can be verified
with the Hard Drive connectors
appearing below the plastic pull
tab.
Step 10. Prepare the new Hard Drive for
assembly.
Step 11. Place the Hard Drive Bracket
over the new Hard Drive.
Step 12. Re-install the four (4) Hard
Drive Bracket screws to secure the
Bracket to the New Hard Drive.
Hard Drive Reinstallation
(Steps 14-18)
Step 13. Insert the Hard Drive Assembly
into the Hard Drive Bay. Hold the Hard
Drive on the sides to avoid damage.
Step 14. Install the Hard Drive by
sliding the Assembly to the right.
Make sure the screw holes align
correctly.
Step 15. Re-install the two (2) Hard
Drive screws holding the Hard Drive
assembly in place.
Step 16. Slide the Hard Drive Door
towards the unit to reinstall. Verify that
the Door sits flush with the unit.
Step 17. Re-install the two (2) Hard
Drive Door Screws to secure the Door.
Old
Hard
Drive
DriveDrive
New Hard Drive