Samsung 403Tn - Manual (Page 35)

Main Icons Info Grid
Remocon Display Selection
Port Selection Control Tools
Select Button
1. Use the main icons to switch into each screen.
2. Allows you to enable or disable the remote control signal receiving function of the display unit.
3. The setting for PC Serial Port can change. The original value is COM1.
4. Click Select all or Clear to select or clear all displays.
5. Use Grid to view brief information on selected display.
6. Select one of adjustable menu in display selection menu.
7. Use Control Tools to control displays.
The remote control Enable/Disable function operates whether or not the power is On/Off, and
this applies to all displays connected to the displays connected to the MDC However,
regardless of the status at the time the MDC is shut down, the remote control signal receiving
function of all displays is initialized to Enable when the MDC is closed.
2. Beginning - Port Setting