Sanyo VDC-HD3100/HD3100P - Manual (Page 37)

The operation privileges of users who perform network operation are divided into 3 levels (admin, operator, and
guest). Each user who attempts to access the camera will be authenticated by the user name and password at
login and granted an appropriate operation privilege.
Operation
Operation Privileges
admin operator guest
Monitor live video. ○ ○ ○
Switching between JPEG image and H.264
video
○ ○ ○
Selecting H.264 video stream protocol
○ ○
–
Changing the user password ○ ○ –
Configuring settings ○ △
–
○
: Available
△
: Available (Excluding NETWORK SETTINGS)
–: Unavailable
Disabling authentication check at login
You may set [ANONYMOUS USER LOG IN] to “ON” on the USER SETTINGS screen to allow anyone to access
the camera without any authentication check at login.
In this case, all login users are regarded as guest users.
This means that users will be presented with an authentication check dialog box if they attempt to
perform any operation beyond the guest user privilege and must enter an adequate user name and
password to proceed.
Login is permitted to the following 5 users.
When you access the camera for the first time, log in as an admin user.
Operation Privileges User Password (Default)
admin admin admin
admin2 admin2
admin3 admin3
operator operator operator
guest guest guest
Update your password periodically for security reasons.
For details, refer to the “USER SETTINGS” section.
Up to 20 users have access to one camera at a time.
Before You Begin Network Operation 12/13