Sony DSR-70 - Manual (Page 66)

66
Chapter 4 Time Data and Sub LCD Menu
Chapter 4
Time Data and Sub LCD Menu
1 Time data indication
Shows the type of time data being displayed.
TC: Timecode
UB: User bits
CNT: Counter count
2 Audio mode indication
This shows the mode in which audio is recorded.
2/48k: two-channel, 48 kHz mode
4/32k: four-channel, 32 kHz mode
– – : recording mode cannot be determined
3 CLIPLINK indication
These show whether or not cassette memory is present
and whether there is CLIPLINK log data.
CM: appears when there is cassette memory
CL: appears when the cassette memory includes
CLIPLINK log data.
No indication: when there is no cassette memory
4 Remaining tape time indication
Displays the remaining tape time (in 2-minute
increments).
–: No cassette is loaded.
When the remaining time falls to 2 minutes or less, the
indication becomes 0 and flashes.
When a tape recorded in DV format (SP mode) is
played back, indication “SP” appears.
Sub LCD Menu Display and Settings –– Making
Operating Mode and Video/Audio Signal Settings
Sub LCD Menu Home Page and Sub LCD Operation Buttons
The sub LCD menu displayed in the sub LCD allows
you to make operating mode and video/audio signal
settings for the unit.
The home page of the sub LCD menu is displayed
when you power the unit on.
00 : 35 : 09 : 04
AU-1 2/48k ANALOG CMPST
TC 2/48k CL 184 BATT
PAGE
NO
EDIT
UP
DOWN
F1 F2 F3 F4
1 Time data indication
2 Audio mode indication
3 CLIPLINK indication
4 Remaining tape time indication
5 Remaining battery power indication
7 Audio setting page selection indication
8 Audio recording mode indication
!º Input video signal indication
UP/DOWN buttons
PAGE button
Sub LCD operation
buttons F1 to F4
6 NO EDIT indication
9 Input audio signal indication
Time data
display area