Sierra Wireless MP 880W User Manual

Page 72

Text mode
Original mode

MP880W Modem User Guide

2130795

The fast rate timer only becomes active when an alarm
condition is triggered by a rise or drop in the level of one of the
digital I/O channels. The default for the fast rate timer is three
seconds.

Note: When the fast rate timer is set to 0, a single report is sent when
an I/O alarm is triggered.

If the GPS timer is set to a value other than 0, it controls the
frequency of reports in the absence of any alarm or event
triggers. (However, if the GPS timer is set to a longer interval
than the low rate timer, the value for the low rate timer will
determine report frequency.)

MP modem

Host

Fast rate timer = 3 seconds
Low rate timer = 5 minutes
GPS timer = 10 seconds

10 seconds

3 seconds

Digital I/O alarm

TM_SUM_REG_IND