Socket Mobile IC-4088A - Manual (Page 28)

22
10
SPECIFICATIONS
GENERAL
• Frequency coverage : 462.5625–467.7125 MHz
• No. of operating Ch. : 14 (simplex)
• Mode : 11K0F3E (FM)
• Frequency stability : ±2.5 ppm
• Channel separation : 25 kHz
• Power supply requirement : 3 AA (R6) alkaline , BP-202, BC-149A
(negative ground) or CP-18A
• Current drain : Less than 500 mA
• Operating temp. range : –4˚F to +122˚F; –20˚C to +50˚C
• No. of CTCSS freq. : 38
• Dimensions : 2 1 ⁄ 16 (W) ×4 1 ⁄ 32 (H) ×1 1 ⁄ 16 (D) in
(projections not included) ; 52.5(W) ×102.5(H)×26.9(D) mm
• Weight : 200 g; 7 oz (including 3 ×AA (R6) batteries)
TRANSMITTER
• Output power : Less than 500 mW ERP
• Maximum deviation : ±2.5 kHz
• Spurious emissions : Less than –40 dB
• Ext. mic. connector : 3-conductor 2.5 (d) mm/2.2 k Ω
RECEIVER
• Receiver system : Double-conversion superheterodyne
• Sensitivity (12 dB SINAD) : Less than 0.2 µV
• Selectivity : More than 8.5 kHz/–6 dB
• Spurious & image rejection: More than 40 dB
• Adjacent Ch. rejection
: More than 40 dB
• Intermodulation rejection : More than 40 dB
• Audio output power
: More than 100 mW at 10 % distortion
(at 4.5 V DC) with an 8 Ω load
• Ext. speaker connector : 3-conductor 3.5 (d) mm/8 Ω
All stated specifications are subject to change without notice or obligation.
IC-4088A_2.qxd 03.6.23 11:58 Page 22 (1,1)