beautypg.com

Ssy ys stte em m p prro og grra am miin ng g – ScyTek Electronics ASTRA 777 Mobile User Manual

Page 35

background image

Entering System Programming
To enter System Programming:

1. Turn on ignition.
2. Within 5 seconds, press the valet switch 5 times.

· The siren will provide three chirps, indicating that you have entered Programming.
· LED Blinks if GPS location is estableshed, LED is ON if not.

3. Press the valet switch the number times equal to the System Option you want to

change.

· The siren will chirp each time the valet switch is pressed.

4. Within 5 seconds, press the transmitter button corresponding to the desired operating

mode for that System Option.

· The siren will chirp to indicate the setting.

1 chirp = Button 1
2 chirps = Button 2
3 chirps = Button 3

5. When you are finished, turn off the ignition to save the changes.

Default Reset
Following this procedure will set all Programmable System Options to factory default settings.

1. Enter System Programming.

2. Press Transmitter Button 3.

·

· The siren will chirp 6 times indicating that the reset signal was received.

· All Programmable System Options are now set to factory default settings.

· The Valet Mode is off.

3. Turn off ignition.

Programmable System Options
The following is a description of the programming options. Some program branches control more
than one option, and may require accessing a particular branch number twice in order to program all
desired features.
1. Horn Chirps with Arm & Disarm. Selects one of two modes: Normal, Horn Chirps Normal.
When selected, the horn will honk only when the alarm is triggered. Horn Chirps. When selected, the
horn will provide the arm/disarmed trigger indications, allowing the siren
2. Arm Mode. Selects one of two modes: Manual Arming or Passive Arming.
3. Passive Door Locking. Selects whether or not the system will automatically lock the doors dur-
ing Passive Arming.
4. Ignition Controlled Locks/ Override Code Set. This dual program branch sets Ignition Con-
trolled Locking and programs the optional Emergency Override Code. If Lock Only is selected, the
doors will not automatically unlock when the ignition is turned off.
5. Ignition Door Unlocking. Selects whether or not the system automatically unlocks the doors
when the ignition is turned off. The Ignition Door Locking feature may be programmed to unlock all
doors or the driver’s door only. If driver’s door only is selected, the optional Passenger Unlock fea-

Page 32 - Astra 777 Mobile

S

Sy

ys

stte

em

m P

Prro

og

grra

am

miin

ng

g