ScyTek Electronics ASTRA 777 Mobile - Manual (Page 13)

System Alerts
1. Geo Fence Alert setup:
Type in the address of the Geo Fence window and the boundary size, chose if alert is for antry into or
exit from the boundaries. Select the Geo Fence Alert.
2. Time Fence Alert:
Set the time alert window, when alert is on, if the vehicle ignition is turned on within the time win-
dow an alert will be set.
3. Speed Alert:
Select the speed threshold, when the alert is set, if the vehicle speed exeeds the set speed Alert is
set.
4. SMS Alert:
SMS alert sends all alerts as a text message to the preset SMS and Email
addresses specified in the vehicle setup window, note: that multiple Emails and text messages are al-
lowed.
5. Input Alerts:
There are four alert inputs that can be selected. Inputs 1 2, and 3 are negative (ground). Input 4 is
Positive (12V), this input when the Skytrak system is connected to ScyTek Astra 777 Mobile Se-
curity System is automatically reports an Alarm Alert. In stand-alone mode an alert will be set
only if the input is valid for over 5 seconds. connect this input to the siren of vehicle alarm.
After completion of alert setup, Press the save button on the bottom of the screen to save the setup
in the remote unit.
The Success responce indicates the unit received the alert setup.
Renaming Input Alerts
Page 10 - Astra 777 Mobile