Seagate BARRACUDA ST3500830AS User Manual
Seagate Hardware
This manual is related to the following products:
Table of contents
Document Outline
- 1.0 Introduction 1
- 2.0 Drive specifications 3
- 2.1 Specification summary tables 3
- 2.2 Formatted capacity 26
- 2.3 Default logical geometry 26
- 2.4 Recording and interface technology 27
- 2.5 Physical characteristics 28
- 2.6 Seek time 29
- 2.7 Start/stop times 29
- 2.8 Power specifications 30
- 2.9 Environmental specifications 33
- 2.10 Acoustics 35
- 2.11 Electromagnetic immunity 36
- 2.12 Reliability 37
- 2.13 Agency certification 37
- 2.14 Environmental protection 39
- 2.15 Corrosive environment 39
- 3.0 Configuring and mounting the drive 41
- 4.0 Serial ATA (SATA) interface 45
- 5.0 Seagate Technology support services 55
- Figure 1. Typical 5V startup and operation current profile 31
- Figure 2. Typical 12V startup and operation current profile 31
- Figure 3. Serial ATA connectors 42
- Figure 4. Attaching SATA cabling 42
- Figure 5. Mounting dimensions for 750-200 GB models (except ST3250410AS and ST3250310AS) 43
- Figure 6. Mounting dimensions for 160-40 GB models (including ST3250410AS and ST3250310AS) 44
- 1.0 Introduction
- 2.0 Drive specifications
- 2.1 Specification summary tables
- 2.2 Formatted capacity
- 2.3 Default logical geometry
- 2.4 Recording and interface technology
- 2.5 Physical characteristics
- 2.6 Seek time
- 2.7 Start/stop times
- 2.8 Power specifications
- 2.9 Environmental specifications
- 2.10 Acoustics
- 2.11 Electromagnetic immunity
- 2.12 Reliability
- 2.13 Agency certification
- 2.14 Environmental protection
- 2.15 Corrosive environment
- 3.0 Configuring and mounting the drive
- 4.0 Serial ATA (SATA) interface
- 5.0 Seagate Technology support services
- Index